Removing Wire Harness From External Power Connection To Starter
- Remove protection cap -3-
from over the electric connections for the starter.
- Screw off fastening nuts -1 and 2-
on the electric connections at the starter.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove electric connections -3 and 4-
(-arrow-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove screws on the wire harness on the cylinder heads and at the water guide and loosen the wire harness.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Carefully open the wire harness housing at the clips and remove wiring from external power connection to starter.
- Open protective cover on the positive terminal for jump-lead starting -+-
(-arrow-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Screw off fastening nut -2-
for B+ line.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove B+ lines.
- 8.1. Open cap -1-
.
- 8.2. Remove B+ line -5-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove wiring from external power connection to starter.