LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Exclusive >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 17 - Engine - Lubrication -- PANAMERA (970) >> WM 170419 Removing And Installing Oil-Pressure Sender (Except PANAMERA S E-Hybrid, PANAMERA S Hybrid, PANAMERA Executive, PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4S Sport Edition, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Installing Oil-Pressure Sender >> Component Overview Of Oil-Pressure Sender

Component Overview Of Oil-Pressure Sender

Fig 1: Identifying Oil-Pressure Sender Components
G09804848Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Oil-pressure sensor adapter
  2. Sealing ring
  3. Oil pressure sender with temperature sensor
  4. Screw, M6 x 40
  5. Plug
  6. Sealing ring
  1. Direction of travel
  1. Replace sealing rings for adapter and oil-pressure sender.
  2. Slide oil-pressure sender -3-  into the adapter -1-  .
  3. Fit fastening screws -4-  .
  4. Plug in connector for oil-pressure sender.
scientia non olet · About LEMON Manuals