Installing Radiator

1. 2.1. Fit supply hose and return hose -A-  on both sides onto the radiator.
   Fig 2: Fitting Accessories On Radiator

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 2.2. Insert the vent line on the left side on the radiator -B-  and make sure that the locking mechanism -A-  engages.
   Fig 3: Inserting Vent Line On Left Side On Radiator

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 4.1. Push retaining frame up into the guide on both sides -C-  .
2. 4.2. Fit the fastening screws on both sides -A and B-  .
   Fig 5: Fitting Condenser Retaining Frame

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 5.1. Fit the holder for the servo lines on the left side.
   Fig 6: Fitting Holder For Servo Lines On Left Side

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 5.2. Fit the fastening screw for the transmission oil line holder on the right side.
   Fig 7: Fitting Fastening Screw For Transmission Oil Line Holder

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 6.1. Push the condenser down into the guide.
   Fig 8: Installing Condenser

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 6.2. Push the cover down into the guide.
   Fig 9: Pushing In Upper Air Guide

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. 6.3. Fit the fastening screws on both sides -1-  for the cover.
   Fig 10: Tightening Screws On Upper Air Guide

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

For tightening torques, see: → 875019 REMOVING AND INSTALLING CONDENSER

Fig 11: Loosening Fastening Screws For Refrigerant Lines

Courtesy of PORSCHE CARS NORTH AMERICA, INC.