LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Exclusive >> Repair and Diagnosis >> Collision >> Body Panels >> 55 - Lids, Flaps -- PANAMERA (970) >> WM 555719 Removing And Installing Release For Rear Lid (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Removing Release For Rear Lid

Removing Release For Rear Lid

  1. Pull section of insulation -5-  off the rear lid (under upper part of lid lock).
    Fig 1: Identifying Rear Lid Section Of Insulation
    G09810168Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Screw off fastening nuts -2-  for rear lid release -1-  from the fastening bolts -3-  .
    Fig 2: Removing Rear Lid Nuts And Bolts
    G09810169Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove release.
  4. Release plug connection -4-  (-a-  ) and pull it off -A-  .
    Fig 3: Disconnecting Plug Connection
    G09810170Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals