LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Exclusive >> Repair and Diagnosis >> Collision >> Body Panels >> 55 - Lids, Flaps -- PANAMERA (970) >> WM 555719 Removing And Installing Release For Rear Lid (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Installing Release For Rear Lid

Installing Release For Rear Lid

  1. Connect plug connection -4-  until it engages securely.
    Fig 1: Connecting Plug Connection
    G09810171Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position release for rear lid -1-  (-A-  ) and guide it in -B-  .
    Fig 2: Installing Rear Lid Position
    G09810172Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Tighten fastening nut -2-  .
    Fig 3: Securing Rear Lid Nut
    G09810173Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Affix section of insulation -5-  for rear lid.
    Fig 4: Identifying Rear Lid Section Of Insulation
    G09810174Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals