Installing Spoiler Drive (Wing)

Install spoiler drive (wing).
1. 1.1. Place spoiler drive (wing) -3- in installation position -arrow A- .
  
  Fig 1: Installing Spoiler Drive (Wing)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Align the spoiler drive (wing) -3- with the markings with respect to the spoiler drive -4- on both sides.
  
  Fig 2: Identifying Installation Position Of Spoiler Drive (Wing)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Information
  - Never make alterations to the micro-self-locking screws, which have a negative effect on the bonding (e.g. using lubricant, loosening bolts and screwing them down again).
  - Replace micro-self-locking screws.
3. 1.3. Secure the spoiler drive (wing) -3- with the retaining brackets -2- and tighten fastening screws -1- to the specified tightening torque Tightening torque 4.5 Nm (3 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.) until secure -arrow B- .
Connect plug connection -arrows- until it engages securely.

Fig 3: Connecting Plug Connection
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Connect plug connection on the spoiler drive (wing) -arrow- .

Fig 4: Connecting Plug Connection On Spoiler Drive (Wing)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.