Removing Wire Harness For ParkAssist

Fig 1: Identifying Park Assist Wire Harness Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Release connectors on the four ParkAssist sensors -b-  and disconnect them.
   Fig 2: Disconnecting Park Assist Sensors

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Release the wire harness from the outer and middle fixing clips.
   Fig 3: Loosening Outer Clips

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Loosen the two inner fixing clips from the rear apron using a screwdriver.
   Fig 4: Loosening Inner Fixing Clips

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Remove wire harness for ParkAssist.