Installing Sealing Ring For Output Shaft

Clean the thread and toothing on the output shaft.

Fig 1: Cleaning Thread
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fill the space between the dust lip and sealing lip on the new sealing ring with grease.

Fig 2: Preparing Sealing Ring
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Tap new sealing ring in flush using pressure piece 9833 side B .

Fig 3: Installing Sealing Ring
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position the flange at the correct position on the toothing of the output shaft and tap on carefully using a rubber hammer.
Screw on new fastening nut using a socket-wrench insert Nr.203 . → Tightening torque: 200 Nm (148 ftlb.)+/-5 Nm (+/-3.5 ftlb.)

Fig 4: Tightening Output Flange Nut
Courtesy of PORSCHE CARS NORTH AMERICA, INC.