Connecting The Battery For Trickle Charging
WARNING: This page is about a different variant/trim than selected.
Information
A charger with a current rating of at least 40 A must be connected to the external power supply points/jump-lead starting points.
Set the charger to maximum A (amps).
Switch off all unnecessary loads (e.g. lights).
When working on the vehicle for more than 15 minutes
When running a diagnosis using the Porsche System Tester
When adjusting the headlights
When working on or with the Infotainment system
If the doors, bonnet and rear lid are open for a long period of time or if these components are actuated frequently