LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (19 - Engine - Cooling 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 195519 Removing And Installing Housing For Coolant Regulator >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install thermostat insert (coolant regulator). For details, see

    > 195819 REMOVING AND INSTALLING COOLANT REGULATOR (THERMOSTAT INSERT) 

  2. Install water pump.

    > 195019 REMOVING AND INSTALLING COOLANT PUMP 

  3. Install vacuum reservoir.

    > Refer to 245419 Removing and installing vacuum reservoir

  4. Fit intake-air distributor.

    > 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR

  5. Fit cross panel

    > WM 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL) (EXCEPT PANAMERA EXECUTIVE, PANAMERA 4S SPORT EDITION, PANAMERA 4 EXECUTIVE) - portion on "Installing"