LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Edition >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 15 - Engine - Cylinder Head, Valve Control -- PANAMERA (970) >> WM 153319 Removing And Installing Chain Housing Cover (PANAMERA S E-Hybrid & PANAMERA S Hybrid) >> Removing Chain Housing Cover At The Left And Right >> Assembly Overview - Chain Housing Cover

Assembly Overview - Chain Housing Cover

Fig 1: Chain Housing Cover Assembly Overview
GWWA15-10962Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Screw
  2. Shaft seal, for crankshaft at transmission side/replace 
  3. Screw
  4. Dowel sleeve
  5. Lower chain housing cover
  6. Threaded pin
  7. Cylinder-head gasket
  8. Screw/replace 
  9. Holder, for wire harness
  10. Holder, for wire harness
  11. Screw/replace 
  12. Chain housing cover, left
  13. Seal/replace 
  14. Seal/replace 
  15. Right cylinder-head gasket
  16. Chain housing cover, right
  17. Nut → Tightening torque: 9 Nm (6.5 ftlb.) 
  18. Holder, for electric lines
  19. Threaded pin
  20. Holder, for heat shield
  21. Screw/replace 
  22. Dowel sleeve
  23. Screw/replace 
  24. Cover
  25. Engine speed sender
  26. Screw
  27. Cover, for engine speed sender
scientia non olet · About LEMON Manuals