Preliminary Work
- Raise the vehicle → 4X00IN LIFTING THE VEHICLE .
- Remove wheel. Use assembly aids (assembly pins) -1-
. → 440519 REMOVING AND INSTALLING WHEEL
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Information
- Do not open the brake system.
- Do not loosen the brake hose from the brake calliper when loosening the brake calliper.
- The core of the warning contact wire must not be left exposed! It does not matter if the insulation is worn.
- If necessary, remove a little brake fluid from the reservoir by suction in order to prevent an overflow when the disc brake pads are pushed back.
- Partly remove the brake calliper → 474119 REMOVING AND INSTALLING REAR BRAKE CALLIPER