LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Edition >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps -- PANAMERA (970) >> WM 553119 Removing And Installing Front Pneumatic Spring (Except PANAMERA Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Removing Front Pneumatic Spring >> Loosening Sleeve At The Body Side

Loosening Sleeve At The Body Side

  1. Insert a screwdriver between the safety clip -1-  and the sleeve -2-  .
  2. Loosen the safety clip -1-  by levering -A-  the screwdriver towards the sleeve -2-  . The safety clip -1-  remains at the head of the sleeve.
  3. Pull the sleeve -2-  off the ball pin. -B- 
    Fig 1: Removing Sleeve On Pneumatic Spring At Body
    G09810144Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Pull out the screwdriver.
  5. Remove the sleeve.
scientia non olet · About LEMON Manuals