Removing Flywheel
WARNING: This page is about a different variant/trim than selected.
- Block the flywheel. To do this, attach > 9538/1 - 9538/1 toothed segment to a screw hole at the bottom of the oil guide housing so that at least one tooth engages with the ring gear.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Toothed segment
- Remove screws. Replace screws.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
PDK it flywheel
| 1
. |
Flywheel |
| 2. |
Fastening screw |