Removing Rear Anti-Roll Bar

Fig 1: Locating Rear Anti-Roll Bar

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosen suspension/stabilizer -1- .
1. 1.1. Loosen fastening nut -2- .
2. 1.2. Counter ball pin using cone wrench Nr.200 .
3. 1.3. Press suspension/stabilizer -1- outwards and remove it from the anti-roll bar.
  
  Fig 2: Removing Suspension/Stabilizer From Anti Roll Bar
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Perform the process in the same way on the opposite side.
Mark the installation position -arrow- of the anti-roll-bar mount halves with respect to the anti-roll bar with a touch-up stick.

Fig 3: Example Of Marking Installation Position Of Anti Roll Bar Half Mounts
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws -1- on the anti-roll-bar mount.
Remove anti-roll-bar mount -2- .

Fig 4: Removing Screws From Anti Roll Bar Mount
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Perform the process in the same way on the opposite side.
Move anti-roll bar -1- to the right and remove it.

Fig 5: Removing Anti-Roll Bar
Courtesy of PORSCHE CARS NORTH AMERICA, INC.