Subsequent Work
- Apply the basic setting for the brake shoes and calibrate the actuators for the electric parking brake. → 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES
- Fit wheel. → 440519 REMOVING AND REINSTALLING WHEEL
- Tighten axle nut (drive shaft mounting on wheel side) (setting 2!). Operate the brake while doing this (2 mechanics required). Tightening torque 460 Nm (340 ftlb.)
- Fill the air springs. → 4301IN BLEEDING AND FILLING THE LEVELLING SYSTEM
- Align the vehicle suspension → 449503 SUSPENSION ALIGNMENT, COMPLETE .