LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Base >> Repair and Diagnosis >> Collision >> Body Panels >> 50 - Body Front - PANAMERA (970) >> WM 505619 Removing And Installing Front Wheel Housing Liner (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Installing Rear Part Of Front Wheel Housing Liner

Installing Rear Part Of Front Wheel Housing Liner

  1. Installation is performed in reverse order to removal.
  2. Fastening screw for wheel housing liner on underbody. Tightening torque 2.8 Nm (2 ftlb.) +/-0.3 Nm (+/- 0.2 ftlb.) 
  3. Fastening nut for wheel housing liner. Tightening torque 2.8 Nm (2 ftlb.) +/-0.3 Nm (+/-0.2 ftlb.) 
  4. Fastening screws for front part of wheel housing liner. Tightening torque 2.8 Nm (2 ftlb.) +/-0.3 Nm (+/- 0.2 ftlb.) 
scientia non olet · About LEMON Manuals