Removing Vacuum Pump
The vacuum pump -1- is installed at the rear of the right cylinder head on the V engine.
- Vacuum pump
- Screw, M6 x 25
- Sealing ring
- Sealing ring
- Pull vacuum hose -3- off the vacuum pump connection piece. Carefully press secondary-air hoses aside.
- Remove vacuum pump.
- 2.1. Unscrew fastening screws -2-
.
Turn the vacuum pump -1- to the side and guide it past the fuel low-pressure line.
- 2.1. Unscrew fastening screws -2-
.