LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front - PANAMERA (970) >> WM 507955 Replacing Front Side Member (Rear Section) (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Preparing Connection Areas Of Body For Installing Side Member

Preparing Connection Areas Of Body For Installing Side Member

  1. Prepare bonding and welding areas on the side member for bonding. → 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE
    1. -A-  - Welding using inert gas
    2. -B-  - Resistance spot welding
    3. -C-  - Bonding and riveting
    Fig 1: Preparing Bonding Areas (Left)
    G09809226Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. -A-  - Welding using inert gas
    2. -B-  - Resistance spot welding
    3. -C-  - Bonding and riveting
      4. Fig 2: Preparing Bonding Areas (Right)
      G09809227Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals