Replacing Light Bulbs

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

1. Remove holder.
   1. 1.1. Release the holder by turning it -A-  and then remove it -B-  .
   Fig 1: Turning To Remove Holder
   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Pull the light bulb out of the holder.
   Fig 2: Removing Light Bulb

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Insert the light bulb.
   Fig 3: Inserting Light Bulb

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Insert the holder -A-  and lock it by turning it -B-  .
   Fig 4: Turning To Insert Holder

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.