LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4S >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> 43 - Level Control, Air Suspension -- PANAMERA (970) >> WM 430419 Removing And Installing Rear-Axle Valve Block (PDCC) (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Removing And Installing Rear-Axle Valve Block >> Installing Rear-Axle Valve Block

Installing Rear-Axle Valve Block

NOTE: Incorrect line routing
  • Risk of damage to lines and hoses
  • Malfunction and fault memory entry on control unit

→ Avoid small bending radii when routing lines.

→ File down edges and burrs in the routing area or mask them with adhesive tape.

→ Maintain a sufficient distance from components exposed to high temperatures while driving.

  1. Installation is performed in reverse order to removal.

    Valve block holder to chassis subframe:

    Pressure line to valve block:

scientia non olet · About LEMON Manuals