Special Tool
WARNING: This page is about a different variant/trim than selected.
Special tools for valves
| 1 | > 3364 - Puller => only for removing valve-stem seals. |
| 2 | > 9606/1 - Assembly driver => only for fitting valve-stem seals. |
| 3 | Universal assembly bar with universal assembly driver Nr.54 Pos.1 - Valve key fitting and removal tool |
| 4 | Hooking piece (fitting hook) with holder (several possible) |
| 5 | Plastic quide for intake and outlet valve Nr.54 Pos.1 A - auide bush. 31 mm and Nr.54 Pos.1 B - auide bush, 28 mm |
| 6 | Assembly fixture for valve keys |
| 7 | Assembly cartridge for valve keys |
| 8 | Assembly bar (hook) with adjustable lever |