Installing Oxygen Sensor Downstream Of Catalytic Converter

WARNING: This page is about a different variant/trim than selected.

Fit oxygen sensor. Grease thread on oxygen sensor sparingly with assembly grease 000.043.207.07.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Special tools for oxygen sensors

> Nr.96-3 - Accessory for torque wrench: Angled open-end/ring wrench

> Nr.97 - Accessory for torque wrench: Angled open-end/ring wrench

> Nr.98 - Accessory for torque wrench: Angled open-end/ring wrench for assembly

> V.A.G 1331A - Torque wrench, 6-50 Nm/4.5-37 ftlb .

> Tightening torque 50 Nm (37 ftlb.)