LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4S >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> 28 - Ignition System -- PANAMERA (970) >> WM 280419 Removing And Installing Ignition Switch (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Installing Ignition Switch

Installing Ignition Switch

  1. Connect electric plug connection on the ignition starter switch until the connector engages securely.
    Fig 1: Connecting Electric Plug Connection
    G09806541Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position ignition starter switch in the dashboard from below -D-  . Fit union nut -1-  and slide it over the ignition starter switch. Check that it fits perfectly. Use special tool key 9800 -A-  to tighten the union nut -1-  . → Tightening Torque: 1.6 Nm (1 ftlb.) 
    Fig 2: Turning Union Nut On Ignition Starter Switch
    G09806542Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals