LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling -- PANAMERA (970) >> WM 193817 Draining And Filling Coolant (Includes Bleeding) (Except PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Subsequent Work

Subsequent Work

  1. Install engine underbody panelling. → Installing Cover For Front Underbody
  2. Close the clip on the bleeder valve.
  3. Fit left plenum panel cover. → 852219 REMOVING AND INSTALLING PLENUM PANEL COVER
  4. Fit lid on the coolant reservoir.
  5. Conduct a test drive with the vehicle, check the fluid level in the reservoir after the cooling system has cooled again and, if necessary, fill up to the MAX marking with coolant.
  6. Check the cooling system if necessary.


  1. Install engine underbody panelling. → Installing Cover For Front Underbody
  2. Close the clip on the bleeder valve.
  3. Fit left plenum panel cover. → 852219 REMOVING AND INSTALLING PLENUM PANEL COVER
  4. Fit lid on the coolant reservoir.
  5. Conduct a test drive with the vehicle, check the fluid level in the reservoir after the cooling system has cooled again and, if necessary, fill up to the MAX marking with coolant.
  6. Check the cooling system if necessary.
scientia non olet · About LEMON Manuals