Installing Transverse Lock Servo Motor

Replace sealing ring on servo motor.

Fig 1: Locating Sealing Ring On Servo Motor Shaft
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert servo motor into transmission.
Screw in fastening screws -arrows- for securing servo motor to transmission. → Tightening torque: 10 Nm (7.5 ftlb.)

Fig 2: Tightening Fastening Screws For Servo Motor
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Plug in cable plug on servo motor and latch it into place.

Fig 3: Plugging In Servo Motor Connector
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install strut on rear axle housing using screws. → Tightening torque: 33 Nm (24 ftlb.)

Fig 4: Installing Rear Axle Housing Strut
Courtesy of PORSCHE CARS NORTH AMERICA, INC.