Removing FLOORPAN

Fig 1: Floorpan Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Drill through spotwelds in areas -A;B- using a spotweld drill Nr.129 .
Information

Drill out the connection point on one side only. Do not damage the plate underneath.
1. 1.1. Drill out spotweld -C- only through the floorpan.
  
  Fig 2: Removing Floorpan
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Drill through spotwelds in areas -A;B;C;D- using a spotweld drill Nr.129 .

Fig 3: Installing Floorpan
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Drill through spotwelds in area -E- using a spotweld drill Nr.129 .

Fig 4: Removing Floorpan
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Heat bonding areas using a hot-air gun.

Fig 5: Heating Bonding Areas
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove carpet by pulling it up.