Replacing Rear Logo: Notes

Heat the rear lid.
1. 1.1. Heat the rear lid close to the logo -1- using the hot-air blower v.a.g 1416 -2- .
  
  Fig 1: Heating Rear Lid
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Prise off logo -1- using a plastic spatula -2- .
1. 2.1. Insert a plastic spatula -2- under the logo -1- and prise off the logo -1- .
  
  Fig 2: Removing Logo
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clean the rear lid.
1. 3.1. Loosen adhesive residue on the rear lid using silicone remover and remove it.