Installing Release For Front Lid
- Guide in locking lug for front lid release -A-
and fold up the release -B-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Screw in fastening screws -2- → Tightening torque: 2 Nm (1.5 ftlb.)
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Secure cable for front lid release.
- 3.1. Fit driver into the bracket -A-
.
- 3.2. Clip guide tube into the bracket -B-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Secure cable for release for lower part of front lid lock.
- 4.1. Clip driver into installation position.
- 4.2. Clip in cable -1-
on lower part of lid lock.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.