LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4S >> Repair and Diagnosis >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> 97 - Cables -- PANAMERA(970) >> WM 972419 Removing And Installing Wire Harness For Removable Trailer Hitch (Except PANAMERA S Executive, PANAMERA Turbo Executive, PANAMERA GTS) >> Installing Wire Harness For Removable Trailer Hitch

Installing Wire Harness For Removable Trailer Hitch

  1. Position wire harness.
  2. Guide the wire harness through the opening in the body and insert the grommet -1-  into the opening.
  3. Secure the wiring harness at the fixing clips -2-  with tie-wraps.
  4. Guide plug socket through recess in trailer hitch.
  5. Insert plug socket -1-  in the socket housing until the plug socket engages securely.
    Fig 1: Fitting Grommet And Tie-Wraps
    G09814167Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Fit rubber seal -2-  and fit lower part of socket housing -3-  . Make sure that the seal makes good contact and that the lower part of the housing engages securely.

    Information 

    Fig 2: Assembling Plug Socket
    G09814168Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Always replace the fastening screws and nuts after customer service and reworking. The micro-self-locking screws must not be treated, greased or loosened and then screwed on again.

  7. Secure the plug socket -2-  to the trailer hitch with two fastening screws -1-  . → Tightening torque: 3.5 Nm (2.6 ftlb) 
    Fig 3: Installing Plug Socket
    G09814169Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  8. Secure the wire harness to the fixing clips with tie-wraps. Make sure that the wire harness follows the contours of the trailer hitch.
    Fig 4: Securing Tie-Wraps To Trailer Hitch
    G09814170Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  9. Plug in electric plug connections -1-  and -2-  on the trailer hitch motor until the connectors engage securely.
    Fig 5: Installing Motor Connectors
    G09814171Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  10. Fit upper part of motor cover -1-  onto the trailer hitch motor -A-  and turn to lock it -B-  until the upper part engages securely.
    Fig 6: Securing Top Half Of Motor Cover
    G09814172Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  11. Secure the ground cable -2-  with the fastening nut -1-  . → Tightening torque: 9.7 Nm (7.2 ftlb) 
  12. Plug in electric plug connection -3-  on the trailer hitch control unit until the connector engages securely.
    13. Fig 7: Securing Connector And Ground Cable
    G09814173Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  13. Attach guard
    Fig 8: Fitting Guard
    G09814174Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals