Loosening Main Wire Harness In Left Wheel Housing
- Disconnect wire harness for starter and cooling fan at the B+ connection in the engine compartment. → Removing Wire Harness From External Power Connection To Starter
- Release and unplug electric plug connection for oxygen sensor upstream of catalytic converter. → REMOVING OXYGEN SENSOR UPSTREAM OF CATALYTIC CONVERTER
- Release and unplug electric plug connection for oxygen sensor downstream of catalytic converter. → REMOVING OXYGEN SENSOR DOWNSTREAM OF CATALYTIC CONVERTER
- Disconnect electric plug connection for front shock absorber (spring damper). → REMOVING FRONT SPRING STRUT
- Release and unplug electric plug connection for sensor for body (PASM).
- Release and unplug electric plug connection for electric fan for radiator.
- Release and unplug electric plug connection for coolant temperature sensor. → REMOVING COOLANT TEMPERATURE SENSOR
- Release and unplug electric plug connection for air-conditioning pressure switch. → REMOVING PRESSURE SWITCH
- Loosen fastening nut for ground point -1- .
- Release and unplug electric plug connection (connection point for front-end wiring) for front-end wire harness. → Removing Wire Harness For Front-End
- Release and unplug electric plug connection for airbag sensor on lock support. → REMOVING AIRBAG SENSOR
- Release and unplug electric plug connection for level sensor. → 431855 REPLACING FRONT LEVEL SENSOR
- Release and unplug electric plug connection for wire harness for front ABS. → Removing Wire Harness For Anti-Lock Brake System (ABS)
- Release and unplug electric plug connection for Tyre Pressure Monitoring (TPM) transmitter (trigger). → WM 443619 REMOVING AND INSTALLING TRANSMITTER (TRIGGER) FOR TPM (EXCEPT PANAMERA S EXECUTIVE, PANAMERA EXECUTIVE, PANAMERA 4 S EXECUTIVE, PANAMERA TURBO EXECUTIVE, PANAMERA TURBO S, PANAMERA TURBO S EXECUTIVE, PANAMERA GTS, PANAMERA 4S SPORT EDITION, PANA
- Release and unplug electric plug connection for auxiliary heating -1- .
- Release and unplug electric plug connection for circulating pump -1- .
- Release and unplug electric plug connection for clutch master cylinder. → REMOVING CLUTCH SWITCH INTERLOCK
- Release and unplug electric plug connection for Servotronic steering gear -1- .
- Disconnect wire harness in engine compartment at the front left.
- 19.1. Loosen rubber sleeve -1- for wire harness in engine compartment at the left.
- 19.2. Make sure that all electric plug connections on the wire harness in the engine compartment on the left are released and unplugged.
- 19.3. Make sure that all brackets are unclipped and released.
- 19.4. Pull wire harness in the engine compartment on the left through the bulkhead from the passenger compartment.