LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4S >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 24 - Fuel System - Electronic Ignition -- PANAMERA (970) >> WM 246319 Removing And Installing High-Pressure Pump (PANAMERA S E-Hybrid, PANAMERA S Hybrid) >> Technical Values

Technical Values

Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw securing high-pressure pump to housing   Tightening torque 9 Nm (6.5 ftlb.)    
Adapter   Tightening torque 27 Nm (20 ftlb.)    
Adapter   Tightening torque 27 Nm (20 ftlb.)    
Union nut securing fuel high-pressure line to high-pressure pump   Tightening torque 25 Nm (19 ftlb.)    
Fuel pressure sensor for low pressure   Tightening torque 15 Nm (11 ftlb.)    
Fastening nut for fuel supply line holder   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw on hall sender   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening screw for high-pressure pump housing   Tightening torque 9 Nm (6.5 ftlb.)    
Fastening nut on protective plate   Tightening torque 9 Nm (6.5 ftlb.)