LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4S >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> 26 - Exhaust System -- PANAMERA (970) >> WM 266519 Removing And Installing Secondary-Air Pump With Bracket (PANAMERA, PANAMERA S, PANAMERA 4, PANAMERA 4S, PANAMERA Turbo, PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Removal >> Removing Secondary-Air Pump With Bracket

Removing Secondary-Air Pump With Bracket

  1. Remove the two M6 aluminum screws from the bracket. -4- 
    1. Bracket
    2. Secondary-air pump
    3. Aluminum screw, M6
    4. Screw element
      5. Fig 1: Identifying Secondary-Air Pump Components
      G09806079Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. The four aluminum screws on the bracket must be removed when removing the secondary-air pump. -3- 
  3. Loosen spring band clamp on the secondary-air pump and pull off the line.
  4. Remove the design cover on secondary-air pumps with a separate cable plug. For details, see → REMOVING ENGINE COVER (DESIGN COVER) .If you only want to move the secondary-air pump aside, the design cover can remain fitted.
  5. Pull off cable plug on secondary-air pump if necessary -1-  . Remove the secondary-air pump -2-  .
    Fig 2: Identifying Secondary-Air Pump
    G09806080Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals