Special Features - V6

Information 

Please observe the following for the V6 => 

• The repair concepts for the V6 are the same as for the V8. 
• The special features and component deviations are listed and shown in →  1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES AND ASSEMBLY OVERVIEWS  . 
• More significant deviations are shown in separate descriptions. 
• If no special features are specifically highlighted, the assembly and adjustment instructions for the V8 apply. 

1. Exhaust manifold
2. Stud, M8
3. M8 hexagon nut; replace; (check nuts by clicking once); observe correct tightening sequence
Fig 1: Identifying Exhaust Manifold Seal Components
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

• - Exhaust manifold seal
• - M6 screw; heat shield to exhaust manifold

Fig 2: Identifying Exhaust Manifold Seal Components

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Exhaust manifold
2. Seal
3. M8 hexagon nut; replace; (check nuts by clicking once); observe tightening sequence
4. M6 screw; heat shield to exhaust manifold

Fig 3: Exhaust Manifold Mounting Bolts Tightening Sequence, Cylinders 1 To 3

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 4: Exhaust Manifold Mounting Bolts Tightening Sequence, Cylinders 4 To 6

Courtesy of PORSCHE CARS NORTH AMERICA, INC.