Removing Control Unit For Auxiliary Alarm System

Fig 1: Identifying Auxiliary Alarm System Control Unit Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Loosen shear-off nuts -1-  using socket-wrench insert 9259  and remove holder for control unit for auxiliary alarm system from the spacers.
   Fig 2: Removing Control Unit Holder

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Remove control unit -1-  from the spacers -2-  .
   Fig 3: Removing Control Unit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Release and disconnect electric plug connection -1-  (-2-  ).
   Fig 4: Disconnecting Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Loosen tie-wrap -4-  and release and pull off antenna plug connections -1, 2 and 3-  .
   Fig 5: Disconnecting Antenna Plug Connections

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Remove control unit for auxiliary alarm system from the vehicle.