Adjusting Rear Door Window (Parallel Positioning)
- Unscrew fastening screw for door window glass.
- Align the catches for the door window mounting.
- 2.1. Roll the door window up fully.
- 2.2. Align the door window until it is parallel with the B-pillar trim and corner window pane -A-
.
- 2.3. Check that the catches are adjusted without tension and re-adjust them if necessary -B-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Screw in fastening screw -1- → Tightening torque: 3.5 Nm (2.5 ftlb.)
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.