Removing Windscreen

Fig 1: Identifying Windscreen Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Removing Sun Visor From Holder

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Open cover for sun visor holder.

Fig 3: Opening Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screw -1- securing sun visor holder.

Fig 4: Removing Sun Visor Holder
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip cover for sun visor base using an assembly wedge.

Fig 5: Unclipping Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws -1- .

Fig 6: Detaching Sun Visor Mounting
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip roof trim panel from the fastening clips close to the sliding roof aperture. (Only on vehicles with a sunroof)
Detach the roof trim panel.
1. 8.1. Unscrew and remove fastening screws -1- (-A- ).
2. 8.2. Carefully lower the roof trim panel -B- .
WARNING:
Vehicle windows removed and installed incorrectly
- Danger of cuts
- Risk of eye injuries
→ Wear personal protective gear.

→ Always shut off power supply when replacing cutting knife.
Separate windscreen.
1. 9.1. Removing windscreens with the cutting wire separating device.
Information
- The procedure for removing car windows is described in → 6X00IN GENERAL INFORMATION ON REMOVING CAR WINDOWS .
  
  Fig 8: Identifying Windscreens Wire Cutting Position
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.