LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> 72 - Seat Frames -- PANAMERA (970) >> WM 729219 Removing And Installing Motor For Rear Vertical Adjustment (Except PANAMERA Executive, PANAMERA 4 Executive) >> Installing Motor For Rear Vertical Adjustment

Installing Motor For Rear Vertical Adjustment

  1. Insert the drive shaft -1-  into the transmission mount by turning it slightly -2-  .
    Fig 1: Installing Drive Shaft
    G09812751Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Slide motor for rear vertical adjustment -3-  onto the drive shaft by turning it slightly and secure with the two fastening screws -2-  . → Tightening torque: 7 Nm (5 ftlb.) 
  3. Plug in connector -1-  on motor for rear vertical adjustment -3-  until it engages securely.
  4. Fig 2: Installing Motor For Rear Vertical Adjustment
    G09812752Courtesy of PORSCHE CARS NORTH AMERICA, INC.