Removing Control Unit For Steering Wheel Electronics

Information 

• The control unit for steering wheel electronics is bolted to the steering column switch. 

1. Pull out electric plug connection -1-  at the underside -A-  .
   Fig 1: Unplugging Electric Plug Connection Underneath

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Pull off electric plug connections -1-  (-A-  ).
3. Release and pull out electric plug connection -2-  (-B-  ).
4. Unscrew and remove fastening screw -3-  .
5. Lift up the clips -1-  (-A-  ).
6. Remove control unit -2-  from the steering-column switch -3-  (-B-  ).
Fig 2: Unscrewing Fastening Screw
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fig 3: Pressing Out Clips
Courtesy of PORSCHE CARS NORTH AMERICA, INC.