LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> 27 - Starter, Power Supply, Cruise Control -- PANAMERA (970) >> WM 271119 Removing And Installing Battery Cross Member (PANAMERA S E-Hybrid, PANAMERA S Hybrid) >> Removing Battery Cross Member

Removing Battery Cross Member

  1. Pull off the two quick connectors -1-  on the cooling lines and close off/mask the connections with stoppers or adhesive tape to prevent dirt from getting into the cooling lines.
  2. Disconnect potential equalization line for the electric high-voltage battery heater.
  3. Unscrew fastening screws -2-  . Check different screw lengths.
  4. Remove battery cross member.
    5. Fig 1: Identifying High-Voltage Battery With Battery Cross Member Fitted
    G09806333Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals