Installing Battery
- Insert and position the battery.
- Position the rail -6-
under the battery and fit the retaining bar -4-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fit the four fastening screws -3 and 5-
and screw in by hand.
- Tighten fastening screws -3-
. Tightening torque 10 Nm (7.5 ftlb.)
- Tighten fastening screws -5-
. Tightening torque 23 Nm (17 ftlb.)
- Risk of short circuit! First connect the positive cable -2-
, then the negative cable -1-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Tighten the terminal clamps. Tightening torque 6 Nm (4.5 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.)