Removing Transmission

Loosen right exhaust system holder -2- on the primary catalytic converter. To do this, unscrew the screw -1- .

Fig 1: Loosening Right Exhaust System Holder On Primary Catalytic Converter
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove exhaust system holder -2- at the right of the transmission.

Fig 2: Identifying Exhaust System Holder And Bolts
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Disconnect cable plug -arrow- for reverse gear on the transmission.

Fig 3: Locating Transmission Connector
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Disconnect cable plug on transmission sensor -arrow- and remove line from the bracket.

Fig 4: Locating Cable Plug On Transmission Sensor
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove slave cylinder from the transmission and secure it in the transmission tunnel. The hydraulic line must not be opened.
Remove chassis brace.

Fig 5: Identifying Fastening Screws On Chassis Brace
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Support transmission with transmission jack and secure with a retaining strap.
Unscrew fastening screws -1- on the transmission support.

Fig 6: Identifying Fastening Screws On Transmission Support
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws -1- securing transmission to engine.

Fig 7: Identifying Fastening Screws Of Transmission Engine
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove transmission from the engine and lower it slightly.
Remove the shift and selector cables at the top of the transmission.

Fig 8: Locating Shift And Selector Cables
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove transmission.