LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4 Edition >> Repair and Diagnosis >> Body & Frame >> Windows >> 64 - Glazing, Window Control -- PANAMERA(970) >> WM 644019 Removing And Installing Front Door Window (Except PANAMERA Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Installing Front Door Window

Installing Front Door Window

  1. Insert the door window glass into the guide -2-  .
    Fig 1: Inserting Door Window Glass Into Guide
    G09810965Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Insert the door window glass into the power windows mounting.

  2. Align the catches for the door window mounting.
    1. 2.1. Roll the door window up fully.
    2. 2.2. Align the door window until it is parallel with the B-pillar trim and corner window pane -A-  .
    3. 2.3. Check that the catches are adjusted without tension and re-adjust them if necessary -B-  .
    4. Fig 2: Aligning Door Window Glass
      G09810966Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Screw in fastening screw -1- → Tightening torque: 3.5 Nm (2.5 ftlb.)  .
    Fig 3: Securing Door Window
    G09810967Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    • The door window in the door in question must be closed in order to install the door sub-frame. 
    • Close the window manually before installing the window regulator motor. 
  4. Install front window regulator motor. → Installing Power Window Motor 
  5. Install door sub-frame. → INSTALLING DOOR SUB-FRAME
  6. Adjust the front door window (final stop). → 644015 ADJUSTING FRONT DOOR WINDOW