Technical Values For Seat
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Folding table to adjustment mechanism | Item 1 | Tightening torque | 16 Nm (12 ftlb.) | ||
| Loosening fastening screws | |||||
| Backrest frame to seat frame | Item 1 | Tightening torque | 35 Nm (26 ftlb.) | +/-4 Nm (+/- 3 ftlb.) | |
|
Fitting fastening screws |
|||||
| Support to backrest frame | Item 1 | Tightening torque | 7.5 Nm (5.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | |
|
Securing support for backrest side bolster |
|||||
| Cover for table top | Item 3 | Tightening torque | 2.5 Nm (2 ftlb.) | ||
| Securing lower table cover | |||||
| Locking mechanism to backrest frame | Tightening torque | 3.2 Nm (2 ftlb.) | |||
|
Tightening fastening screws on locking mechanism |
|||||
| Locking mechanism to backrest frame | Tightening torque | 5 Nm (3.5 ftlb.) | |||
|
Installing retaining bracket |
|||||
| Bearing pins on backrest frame | Items 1 and 2 | Tightening torque | 50 Nm (37 ftlb.) | +/-5 Nm (+/- 3.5 ftlb.) | |
|
Tightening bearing pins |
|||||
| Bearing pins on backrest frame | Items 1 and 2 | Tightening torque | 50 Nm (37 ftlb.) | +/-5 Nm (+/- 3.5 ftlb.) | |
|
Tightening bearing pins |
|||||
| Bearing pins on backrest frame | Items 1 and 2 | Tightening torque | 50 Nm (37 ftlb.) | +/-5 Nm (+/- 3.5 ftlb.) | |
|
Tightening bearing pins |
|||||
| Lock to backrest frame | Tightening torque | 23 Nm (17 ftlb.) | +/-2.5 Nm (+/- 2 ftlb.) | ||
|
Tightening fastening screws for lock |
|||||
| Fastening screw for seat-surface extension | Item 1 | Tightening torque | 6.5 Nm (5 ftlb.) | +/-0.5 Nm (+/- 0.5 ftlb.) | |
|
Removing fastening screws at the bottom |
|||||
| Fastening screw for seat-surface extension | Item 2 | Tightening torque | 6.5 Nm (5 ftlb.) | +/-0.5 Nm (+/- 0.5 ftlb.) | |
|
Removing fastening screws at the top |
|||||
| Fastening screw for seat-surface extension, rear | Item 2 | Tightening torque | 10 Nm (7.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | |
|
Tightening fastening nuts |
|||||
| Lock for load-through provision | Item 2 | Tightening torque | 20 Nm (15 ftlb.) | +/-2 Nm (+/- 1.5 ftlb.) | |
|
Tightening fastening screws for lock |
|||||
| Fastening screws for folding table | Item 3 | Tightening torque | 16 Nm (12 ftlb.) | ||
| Installing folding table | |||||
| Fastening screw securing front seat to front seat frame | Item 2 | Tightening torque | 50 Nm (37 ftlb.) | +/-5 Nm (+/- 3.5 ftlb.) | |
|
Tightening front fastening screws |
|||||
| Fastening screw securing front seat to rear seat frame | Item 1 | Tightening torque | 50 Nm (37 ftlb.) | +/-5 Nm (+/- 3.5 ftlb.) | |
|
Tightening rear fastening screws |
|||||