Installing Lower Part Of B-Pillar Trim Panel
Information
Check that all fixing clips are positioned fully and correctly.
Check that the fixing clips are not bent or broken.
Replace damaged or missing clips with new ones.
- Lift up rear part of door sill trim.
- Clip in lower part of B-pillar trim panel.
- Swivel B-pillar trim panel into place and clip it in.
- Tighten fastening screw -1- to specified tightening torque Tightening torque 5.5 Nm (4 ftlb.) until secure.
- Position armrest extension -2- and align according to the contour of the armrest on the door panel.
- Secure armrest extension.
- 6.1. Tighten fastening screw -3- to specified tightening torque Tightening torque 5.5 Nm (4 ftlb.) until secure.
- 6.2. Fit cap -4- .
- Clip in rear part of door sill trim.