Installing Rear Centre Console (Business)
- Place bracket for rear center console (Business) -2-
in installation position and tighten rear fastening screws -1-
to the specified tightening torque Tightening torque 27 Nm
until secure.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Place rear center console (Business) in installation position -2-
and tighten front, bottom and side fastening screws -1-
to the specified tightening torque Tightening torque 3.2 Nm (2 ftlb.) +/-0.5 Nm (+/- 0.5 ftlb.)
until secure.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Plug in connectors -2, 3 and 4-
(-arrows-
) until they engage securely.
- Clip in LED -1-
(-arrow-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Clip in side trim panel -1-
at both sides -arrow-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fit rear center console (short) -1-
(-arrow-
) and align it with the rear center console (Business) -2-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.