Technical Values: Notes
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for high-pressure line | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Union nuts on high-pressure lines | Coat ball/conical joint with Microgleit977Sgrease | Initial tightening | 20 Nm (15 ftlb.) | ||
| Fastening screw for high-pressure line | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Union nuts for high-pressure lines | Final tightening | +35 Nm (+26 ftlb.) |