LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4 Edition >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 24 - Fuel System - Electronic Ignition -- PANAMERA (970) >> WM 246319A5 Removing And Installing High-Pressure Pump >> Subsequent Work

Subsequent Work

  1. Assemble plenum panel (fit cross panel). Refer to WM 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL) (EXCEPT PANAMERA EXECUTIVE, PANAMERA 4S SPORT EDITION, PANAMERA 4 EXECUTIVE) .
  2. Fit the fuse for the fuel pump.
  3. Bleed the fuel high-pressure system. Erase the fault memory if necessary.
  4. Reset the high-pressure adaptation values and then carry out an adaptation drive. Carry out instructions in the same way as for replacing the DME control unit. Refer to WM 247055 REPLACING DME CONTROL UNIT (EXCEPT PANAMERA S EXECUTIVE, PANAMERA 4 S EXECUTIVE, PANAMERA TURBO EXECUTIVE, PANAMERA GTS) 
scientia non olet · About LEMON Manuals