LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4 Edition >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 24 - Fuel System - Electronic Ignition -- PANAMERA (970) >> WM 246319 Removing And Installing High-Pressure Pump (PANAMERA S E-Hybrid, PANAMERA S Hybrid) >> Preliminary Work

Preliminary Work

  1. Remove engine cover. → 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER)
  2. Remove throttle valve cover.
    1. 2.1. Loosen hose clamp -1-  on the connection for the air-cleaner cowl and pull off throttle valve cover.
    2. 2.2. Loosen hose clamp -2-  on the throttle valve and pull off throttle valve cover.
    3. 2.3. Pull off vacuum hose -3-  at the throttle valve cover and unclip tank vent line -4-  and XY line -5-  .
    4. 2.4. Pull throttle valve cover up and off.
      Fig 1: Identifying Throttle Valve Cover
      G09805916Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals