Removing Vacuum Reservoir
- Remove vacuum reservoir.
- 1.1. Release electric plug connection -1-
for the boost pressure control cycle valve and pull it off.
- 1.2. Pull off pressure line -2-
for boost pressure control at the cycle valve.
- 1.3. Release and pull off plug connections -3-
for the tank vent line. Unclip tank vent line from the bracket.
- 1.4. Release and pull off electric plug connection -4-
for the tank vent valve.
- 1.5. Pull off circulating air line -5-
.
- 1.6. Release and pull off electric plug connection -6-
for change-over valve for recirculated air.
- 1.7. Loosen screw -7-
on the fuel connection line holder.
- 1.8. Loosen connections -8-
for the fuel connection line.
- 1.9. Loosen screws -9-
on the vacuum reservoir.
- 1.10. Remove vacuum reservoir.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.